Today I’m sharing the tutorial of our DIY Wood Nativity…
It is super easy to make and they are great for gifts!
So many of you asked me how I made our Wood Nativity
so I had to put together a quick tutorial for you my friends… Enjoy!
You’ll need:
Two pieces of 2×2 wood.
{ For Joseph’s body: 6” long. For Mary’s body: 5” long. }
1 small piece of wood for the manger: 1×2 that is 3” long.
2” Wood Ball for Joseph’s Head.
1.5” Wood Ball for Mary’s Head.
1 Wood Peg
DecoArt Santa Red Acrylic Paint
{ because this is the most beautiful red ever. I use it all the time.}
Gray Acrylic Paint
1/8 yard fabric.
Scissors, brush, glue gun, and sand paper.
Handmade Wood Nativity
TUTORIAL
First plug in your glue gun.
While it is heating up paint your wood towers and stain the small wooden manger.
When the wood is dry, glue the wood balls on top of each tower
and the small wood peg on the other piece of wood.
At this point it will look like this… So cute!
Now it is time to dress them up!
Cut two pieces of fabric one about 3.5”x5” rectangle and the other one about 7.5”x7.5” square.
For the blanket use the rectangle piece.
1. Wrap the front and glue the fabric on the back.
2. Fold over the other side and glue it.
Trim the length so it is easy to work with.
3. Fold the end like you would do if you were wrapping a gift and glue it.
These pictures are showing the back of the manger.
Use the square piece for Mary’s head piece.
Fold the fabric in half. This way you’ll see the polka dots from every angle.
Ready?
Let’s make the head piece.
1. Place and center Mary on top of the fabric.
2. Bring the two top corners towards the body and glue them to the wood.
3. Turn Mary around and secure the fabric to the wood with the glue.
4. Fold one of the corners towards the center and glue it.
4. Do the same thing with the other end.
She is done!
For Joseph my little girl found me some sticks in our backyard.
All we did was pick the perfect one and glue it to his body.
Here is the entire family!
At this point I thought I was done but then Mimi reminded me that they didn’t have a home.
My little girl was right and we had to do something about that.
I have this crate that I used to have in my Sew Cute Corner.
I love the look of it and I didn’t want to change it so paper was the solution!
All I had to do was cut a 8×8 piece of paper and put it inside of the crate…
The hard part was choosing what background I liked best.
Fromm the same paper stock I punched two snow flakes, I added some rusty wire,
glued them all together and I had the perfect star…
…for our Handmade Nativity.
Isn’t it sweet?
Here you can see it as part of our Red and White Family Room.
If you haven’t yet, click here and take a tour of the entire room.
You have to see the Christmas Trees!
As I mentioned in the beginning I am giving away the Nativity I made for the tutorial.
I don’t need two and it is the CHRISTmas Season after all!
Don’t you think this would made the cutest Christmas Gift?
Love it!
Happy day my friends!
Besos
Desiree
Hello, I’m getting ready to make this. Been eyeing it up for ears. Where do I get the wood balls for the heads? And do I need to cut the bottlem so they sit flat?! Thanks so much!!!
Hi! Thank you so much for this awesome tutorial. I am in the process of gathering supplies to create it and I can’t find that paper pack at Michaels. Is it a paper pack from this year?
Thanks again so much!
Diane
Diane, it’s not. 🙁
I got it last year… I hope you find some you like and have fun making the nativity!